|
Home > Models > Telstra 4G & 4GX
Cel-Fi pro for Telstra 3g & 4g
The Cel-Fi Repeater has been tested, authorised and approved by Telstra for use on the Telstra Mobile Network.
Nextivity's third generation Cel-Fi PRO is a cost-effective and intelligent indoor coverage solution for Telstra's Next G, 4G and 4GX networks operating on 3G 850Mhz and 4G 700/1800 bands. It is designed to dramatically boost indoor voice quality and increase data speeds for HSPA or LTE consumers.
Note: Cel-Fi PRO will boost 3G 850 and only one 4G band, either 700 or 1800 (not both 4G bands at the same time).
The Cel-fi PRO differs greatly from the standard indoor repeater due to its ability to not interfere with the mobile network or other users. Often referred to as a Smart Repeater, the Cel-Fi has the ability to provide maximum coverage, be network friendly and can be easily installed by the end user.
It does this in several ways by
- continuously monitoring power levels of the cell tower it is connected to and constantly adjusting the Cel-Fi's output power to suit.
- only amplifying and disbursing a particular carrier’s mobile signal, operating within a set frequency band.
- not interfering with the carrier’s network or other users on the network.
- having a unique installation process to eliminate feedback into the mobile network.
Cel-Fi PRO is covered by a 24 month warranty.
Downloads
Cel-Fi for Telstra 4G Brochure
Cel-Fi PRO Quick Start Guide
Supported Networks
Telstra, Aldi Mobile, Boost Mobile, Woolworths
Note: Firmware upgrade is now available to support WAVE smart phone App. |
|



30 Day Money Back Guarantee*
If you are not 100% happy with the performance of this product it can be returned within 30 days after purchasing for a full refund minus any shipping charges... terms and conditions
Disclaimer *Credit provided by Oxipay Pty Ltd. Terms, conditions, late payment fees and lending criteria apply.
See www.powertec.com.au/oxipay-terms.
Easy 5 Minute Setup
Up to 900m² indoor coverage area
Locked to Telstra's Mobile Network
Mobile Network Protection
External Antenna Port
LCD Display
Bluetooth WAVE App for iPhone, Android & Computers
|
|
|
Once you receive your Cel-Fi it will need to be registered and activated using the Cel-Fi Wave App, available on iPhone, Android, PC and Mac.
In order to do this you will need internet access on your phone or computer.
We no longer need to collect your information before the Cel-Fi GO or PRO for Telstra product is shipped.
Further information can be found at http://cel-fi.com.au/blog/registration/
|
|
Specifications
FREQUENCY |
UMTS/3G 850 - Band 5
Uplink: 824 - 849 MHz, Downlink: 869 - 894 MHz
4G 700/1800 - Band 28 & 3
Uplink: 703 – 733 MHz, Downlink: 758 – 788 MHz
Uplink: 1710 – 1785 MHz, Downlink: 1805 – 1880 MHz
(Will only boost one 4G frequency at a time)
|
DATA |
UMTS / HSPA / HSPA+/ LTE (FDD)
|
GAIN |
|
PROCESSOR |
Nextivity IntelliBoost Ares
|
NETWORK UNIT |
H: 179mm
W: 155mm
D: 110mm
Weight: 540g
|
|
H: 160mm
W: 164mm
D: 79mm
Weight: 450g |
|
|
ENVIRONMENT |
Operating Temperature: 0° to 40°C
Storage Temperature: -25° to 60°C
Relative Humidity: 5 to 95% noncondensing
|
POWER |
12 VDC via external supply (2 included)
External Supply: 100-240 VAC, 47-63Hz
Power Consumption: <25W per unit |
INTERFACES |
External Antenna Port: SMA Female
Programming Ports: Mini-USB
Bluetooth Low Energy |
WIRELESS LINK |
5 GHz link compliant U-NII |
CERTIFICATIONS |
CE Mark
C-TICK
FCC
|
|
|