CEL-FI SETUP

INSTALLATION
Cel-Fi GO is a state of the art, very complex “Smart Repeater” and is approved by Telstra if installed correctly.
It is guaranteed to provide massive signal enhancement in poor reception areas, however incorrect installation may significantly reduce performance.
Installation of a Cel-Fi GO is best done by a qualified installer. Only qualified Powertec Telecommunication Resellers who have undertaken product training on the required precautions should perform installation of the Cel-Fi GO.
Vehicular Cel-Fi GO Packs in particular require you to take into account the vehicle’s safety mechanisms such as airbags, ABS, Traction Control, Stability Control and the auto electrics. Incorrect installation may result in water leaks, electrical failure, battery damage, fusing of internal wiring and cables or risk of FIRE. Misuse of this equipment could result in injury and equipment damage. In no event will Powertec Telecommunications P/L be responsible or liable for either indirect or consequential damage or injury that may result from the installation or use of this equipment.
If the above precautions are not fully understood, or if local conditions are not covered, contact your nearest Powertec Telecommunications sales or service representative for clarification.
You should also be familiar with applicable federal, state and local legislation and industry standards surrounding installations.
YOU SHOULD BE TRAINED IN HANDLING, INSTALLING, OPERATING AND MAINTAINING THE CEL-FI GO BEFORE YOU WORK ON ANY CEL-FI GO SYSTEM.
CEL-FI GO BLOG POSTS
GO to the NT
Thanks to staff at Centre For Appropriate Technology in Darwin for undertaking testing of Cel-Fi GO across outback NT. Great results achieved in some very remote communities.
Testing Different Antennas With Cel-Fi GO
During our GO testing we tested several different antenna types to see the effect this had on the boost and the final signal strength on the phone.
Installing GO in a Car
This article explains how to install Cel-Fi GO in a car, different setups and what performance you can expect.
The Cel-Fi GO Booster Models
If you are wondering why the Cel-Fi GO comes in two flavours, a ‘Stationary’ & ‘Mobile’ version, then this is the article you need to read.
Cel-Fi WAVE App
Cel-Fi WAVE offers a window into what is happening within the heart of a Cel-Fi smart booster. It also enables you to control certain features of the unit.
Cel-Fi GO – LED Indicators Explained
As Cel-Fi GO is only able to boost one frequency band at a time, a way of indicating and switching between frequency bands was developed by using a button. The button enables the selection of 3G, 4G/4GX or AUTO (band with strongest signal). An LED indicator displays which band GO is currently boosting.
Unboxing the Cel-Fi GO for boosting mobile phone signal in a car
Today we decided to unbox the Cel-Fi GO Mobile Version, the new repeater for boosting a mobile signal in a car.
* 30 Day Money Back Guarantee - Customer must return the Cel-Fi repeater within 30 days of receiving if the product does not perform to their expectations. Item must be returned with all packaging and parts in original condition. Refund component does not include any shipping charges paid.
* Telstra Approval - Customers must undertake an approval process to determine the product is suitable for their location. A Telstra approval form will need to be completed and signed by the customer.
Want to learn more about the legal situation of Repeaters and Boosters in Australia, visit www.mobilephonebooster.com.au for further information.
® is a registered trade mark of Telstra Corporation Limited. ABN 33 051 775 556 |